Fairy Wing Jewelry Flash Sale Saturday, 2/12 at 1pm PST

The faux opal jewelry is complete! Made with polymer clay and metal wing veining, topped with clear resin.

The veining is made from thin brass and nickel silver, and all are my original wing designs that you won't find anywhere else.

I'll be selling 1 or 2 of the faux opal brass ones as a set with both earrings and necklace for $144, and the necklace on its own will be $79.

One of the left-facing faux opal brass Colette wing necklaces will be marked down as irregular because it had some excess glue around the brass bail causing it to be a bit dulled and the area immediately surrounding it a little scuffed, so that's why that close-up is there. It will be $59

The silver Colette wing necklaces will also be priced slightly lower than the brass ones as there is some scuffing near the top of the pendant from an attempt at a glue-on bail that did not work out and had to be scraped off, though it's mostly hidden by the star charms. They will be 60 each.

They're still special in their own way though because they're from the very first run when I made the veins a lot thinner and they were all kept in the design. But, because they were too thin for the material, some of the smallest veins were lost or had breaks in them so the new ones will look like the brass versions you see here - thicker veins and not quite as many of them.

One of the Datura faux opal & brass necklaces will also be slightly discounted at $55 due to it having some tiny bubbles in the resin, and some of the polymer clay ended up covering a few vein areas when I embedded the metal into the clay. It is, however, the sparkliest one! The others will be $69 each. The left facing one was photographed at night under a bright light because I forgot to do it with the rest earlier, oops! However, I do like how the spot light brings out even more of the glimmer in the ‘opal’.

The pinkish glittery resin Nightshade necklace will also be sold with glitter resin Nightshade earrings to make a set for $65.

The multi-color glitter earrings will be marked down as irregular for $25 since both earrings face right, and the Datura glitter resin and silver earrings will be $25 each. That one set of the thin-veined Colette earrings with the magenta-violet shimmer resin will be $18, they have a few bubbles as you can see in the photo but they are also one of those rare ones that won't be made again.

Shipping is additional.

You can see them in motion on my Instagram Reels:
https://www.instagram.com/reel/CZXsnd5BnrA/?utm_source=ig_web_copy_link
https://www.instagram.com/reel/CZ0GvhmPJJI/?utm_source=ig_web_copy_link

Again, these all will list on February 12 at 1pm PST, here: https://fancy-fairy-wings-things.myshopify.com/collections/flash-sales

 If you’d like to further support me and have access to behind the scenes content such as process photos and video (coming soon) from the making of the faux opal wing jewelry, you can subscribe to my Patreon starting at only $1 here: https://www.patreon.com/faeryangela

Real Metal Fairy Wing Jewelry is Finally Here!

My original fairy wing designs have been cut out of brass (and silver nickel too but that a later batch) so I can now offer you necklaces and earrings. Clear resin is applied to the wing charms, with iridescent film on the back for a beautiful jewel-like finish. These will be listing tomorrow, Saturday July 31 at 6pm Pacific Daylight Time.
This first set is the first run, which had flaws and some missing veins due to how very thin I made them. This also makes them special, because I won’t be making more as delicate as this once I use up the ones in this cut batch - the official runs will be made with slightly thicker veins, and less veins on the Colette wings.
What I consider a flaw though, also makes these appear more life-like an delicate.
These are not made for children, due to some pointy ends and some areas on the Colette styles where the resin has very thin cracks that could make them scratchy.

Above are the 2 versions of the Colette fairy wings necklaces.
Main photo is of the upper panel of the design, finished with brass filigree, green glass & antiqued bronze beads and a rose gold plated chain.
1st photo in the row shows the lower panel from that same design, with green glass & brass filigree and brass plated chain. Both backed with the Absinthe iridescent film.
3rd photo is of the Kira upper wing design backed with the Opal film, accented with rainbow anodized star and iridescent indigo glass beads & brass filigree.

There will be 3 of the Colette small necklaces, 2 of the Colette large necklaces and 2 of the Kira necklace.

There will also be earrings!

Below are the celestial themed Datura wing earrings. 1 available with an 8 pointed star charm, 2 with brass filigree, and 2 with a 5 pointed star. Ear wires are iron with brass plate.

The larger Colette and Kira necklaces will be $59, the smaller Colette necklaces $49, and the Datura celestial earrings will be $65.

Need a link to the flash sale page? Here you go! https://fancy-fairy-wings-things.myshopify.com/collections/flash-sales

Accessories Flash Sale Tomorrow, Friday Sept. 4 at 8am Pacific!

Surprise!
Well if you are a Patreon patron it’s not so much a surprise, but usually I like to announce things more ahead of time.
Tomorrow, Friday 9/4 at 8am Pacific Daylight Time, I’ll be listing all of the pieces below - 2 crowns, 3 hair combs and 3 each of the dark and light crystal Nightshade necklaces.

I’m never sure if any of these accessory pieces will be repeated because sometimes the specific settings & findings are unavailable after I’ve used a small batch, but I can tell you now I won’t repeat those tiaras exactly. That brass stamping was torture to solder to the metal band and although some of that was my own inexperience with soldering these types of things together, much of it was that type of stamping with no flat areas in back of it is just plain difficult to solder especially for a piece that needs to flex to be worn.
If it weren’t for an opportunity that unexpectedly came up, i would have jumped ahead by now to getting my own crown design cut from metal and am still moving forward with that.

Next time I offer crowns, they should be completely original pieces with a few added commercially available embellishments like jewels and their settings.
Need a link to the shop? Bookmark it so you won’t be late! https://fancy-fairy-wings-things.myshopify.com/

Dark Crystal Inspired "Nightshade" Fairy Wing Necklaces

I’ve tried a new thing with my mini wings!

I started on this project last year around the time The Dark Crystal: Age of Resistance came out and these necklaces are very much inspired by the movie and series.
But, life got complicated and so like many of my developing projects they got put on the back burner for a while.
This is the Nightshade wing design, which sprung from my older Kira design. The wings are iridescent film and acetate that's been embossed with foil for the veins, and coated in clear resin, then attached to metal jewelry findings and further embellished with iridescent crystals.
I made one dark version with the Dark Crystal film & copper accents, and one light version with the Lilac film & silver accents, and will find out this week if they are something I can make a batch easily enough to offer to you all!
Yes there will be a flash sale soon with these necklaces and other winged accessories.
If you want a sneak peek behind the scenes of what I’ve been working on, you can join my Patreon here: https://www.patreon.com/faeryangela