Photos of the Unseelie Ellette Flare & Wrap Skirts, Silk Scarf

Photos of the Unseelie Ellette skirts and square scarf are here! Below is the Flare Skirt, made of the stretch Eco-Poly fabric. The print on this came out nicely vibrant.

Unseelie Ellette Flare Skirt, size large

I can never guarantee that what you'll see on your screen is 100% accurate to real life, but I'm trying my best to make sure the photos' colors match what I'm seeing.

The Flare skirt has a more saturated print. I got the large size, though I wonder if I should have gotten the medium as the waistband sometimes kind of floats up when I sit down, but if I did it might be too tight around my hips and butt. Make sure you get the size that will fit your natural waist because this waistband is made for sitting right at the waist and not resting on the hips below it. The waistband is straight up-and-down, and does not have curvature that would make it fit properly on  curvy hips that way.
My waist hovers around 30"-31", just fyi.

Next, is the Unseelie Ellette Wrap Skirt.

Unseelie Ellette Wrap Skirt in Matte Crepe fabric

The wrap skirt I really like because it's so full as well as adjustable, but the two issues I noticed were a less saturated print on the matte crepe fabric, and it had quite a bit of static cling.  I was wearing nylons, so that may have done it. Now I wonder if perhaps the peachskin jersey wouldn't have that problem so that will be the next sample I order.
There are ways to deal with static, so it's not the end of the world, and there is a good amount of the print that shows through the back as well so that’s a bonus that makes up a bit for the less saturated printing.

The below photo shows the matte crepe wrap skirt draped on top, with the flare skirt on bottom so you can see the comparison in print quality and colors.

I also discovered a few other ways to wear the wrap skirts!

Unseelie Ellette Wrap Skirt - worn as an asymmetrical dress

It would work best on small people (my mannequin is a size 4-6) and I wouldn't trust wearing it without anything underneath, but for beach or festival wear it could come in handy as a last-minute fairy dress if you need one.

Last but not least is the Unseelie Ellette 26” x 26” square scarf in silk habotai. You can see the print on the silk has a much warmer tone to it.

The print quality is great but it will be a little darker and warmer, yet more saturation than the matte crepe - at least, more than the crepe used on the skirts. I am not sure if the scarves are made with that same fabric or not. Below you can see how well the print shows through the back on the silk, as well as a comparison photo showing the silk scarf on top of the matte crepe wrap skirt.

I hope this helps you decide! I may be moving these items over into my Shopify or Etsy store before long, and when I do there may be a slight pricing increase.
For now, you can find all my wing printed apparel here: https://artofwhere.com/artists/fancyfairywingsandthings

Real Life Samples of the Colette Pixish Long Scarves

My Art of Where samples came in, and I got to model the scarves yesterday so you can see what they really look like printed - spoiler alert, they look great!

I can't decide which one should be the main product photo though, which is your fave?

The long scarf is the silk option, which has wonderful show through of the print on the opposite side. The color is slightly warmer and darker or duller than the polyester satin charmeuse fabric is, but it's not a drastic difference. The shorter one is the polyester chiffon, which prints a bit brighter and cooler, but very transparent as that's what makes it chiffon.

Below you can see some of the fabric options and how much you can see the print in back. The chiffon and silk habotai show the print on both sides best, but the satin charmeuse is really beautiful with more accurate colors & crisp print quality, almost feels like the silk and drapes really well with a satiny finish.
The matte crepe looks great too, but not really shiny. To the eye it almost looks the same as the satin charmeuse, at least with the Colette print - the matte crepe of the Unseelie Ellette skirt looked more dull than the eco poly fabrics of the same design, so I don’t know if the matte crepe used for the skirts is different or if there is something about those colors that don’t like the crepe.
I’ll either update this blog with those photos or make a new one for the Ellette items.

I have a lot more to crop and edit, including the skirts and leggings, much more to come!
The POD items such as these *might* be moved to my Etsy or Shopify store once I have the new photos done, if I can find out if it will make a difference with my tax bracket. If it won't hurt me that way then I may do that and close the AOW store, and make a slight price increase since I'd be handling more customer service that way. So if you have been meaning to get something from there you may want to do so before that happens if you want to pay a bit less.

Want one of your own? Here’s the link: https://artofwhere.com/artists/fancyfairywingsandthings


Photos of me taken by Jordan Price for Fancy Fairy Wings & Things.
Photo retouching and color correction by me. Editing was done very minimally but for transparency's sake I did edit out my eyebags so I don't look so tired, and fixed a crooked lip position in just a couple of these.

Patreon Membership Payment Change

Important announcement for Patreon subscribers!


I've just changed my creation payment type to monthly rather than per-creation, due to the inability to prevent patrons from joining to grab all the content and then leaving without paying a dime for anyone who does not have monthly and 'charge up front' selected.
I'm sorry to change the subscription type on everyone, but I had no idea how unprotected my content was until a recent forum post.
Since I have so many IP issues already, I could not afford to wait to make the change. Those of you who already subscribed will simply be charged on the 1st of the month as you have been, and new people joining will be charged right when they join and then per month after.
Thank you for understanding and have a fairytastic weekend!

New Fancy Fairy Leggings, Skirts and Scarves!

A small collection of apparel & scarves / fabric is now available in my shop, all featuring my original fairy wing designs!

You can find the whole collection here: https://fancy-fairy-wings-things.myshopify.com/collections/art-of-where-collection
*As of 7:45pm on Jan.11 I’m currently having problems with the Shopify integration when it comes to shipping for Art of Where products, I’m so sorry! For now, you can still find the collection in the Art of Where marketplace store here: https://artofwhere.com/artists/fancyfairywingsandthings

Please note that these are showing digital mockups, not actual finished physical product so color might vary slightly from what you see on your screen.

I did order samples but they won't be here for at least a week and a half, however I've had Art of Where highly recommended. I've also seen their stuff in person & the quality seemed great!

This is just the beginning, as there are many more items I plan to add designs to as well as lots more wing designs to be added. But now I need to get back to finishing some wings and special orders after spending most of last week figuring this all out.
I am still in the process of making leggings and flare skirts for plus sizes, as I have to use a different vendor that offers them - however I’ve heard Art of Where will be adding plus sizing this year as well.

So go ahead, and be a little fae everyday :)

New Fairy Wing Themed Apparel Coming Soon!

How would you like to add Fancy Fairy wing designs to your daily wear?
That will very soon be possible, as I am going to be using Art of Where to produce skirts, leggings, and other items printed with my original wing designs!

All I need now is to decide if I will be using the raw digital painting files (left), or the finished iridescent wing photos (right) in the products.
What do you prefer?

New Fairy Winged Back Apparel in my Zazzle Store

Though I’m not currently making wings with this design, it lives on! So c’mon, grow a pair ;)

Screen Shot 2019-12-17 at 11.55.32 AM.png

Since my Kira wings design has been um, popular as of late, I thought I’d dust off my old to-do list and finally add it to products in my Zazzle store.
Didn’t know I had one? It’s been around for a few years now and there’s a link to it in my Shop page, however I’ve been neglecting it a bit and I’m working on changing that as well as adding other POD printers to my store that can put my art on more items that I think any faerie will love.

For now, this Kira design can be applied to most of the Zazzle products in addition to the top you see in these photos, and you can also get it without the ‘Grow a pair’ text.
Here is an affiliate link to take you there (affiliate means I get a percentage of the sale but you don’t pay the same amount either way)
http://shrsl.com/20rno
I’ve got even more in store for you so make sure you’ve joined the mailing list for updates!

New Patreon Rewards for November

They’re late, but they’re finally here! I’ve posted new fairy wing SVG cutting files to the 2 upper tiers of my Patreon patrons.
The Extra Fancy tier is receiving the Luna Moth wing panel file.

The Fanciest of Them All receives the above Luna Moth wing file PLUS the Dragonfly wing files!
These are quite detailed, even without the extra painted layer of the tiniest veins.

These are both designs straight from nature, so you are free to create wings or other things from them for either personal or commercial use.
Please no distribution of the files themselves though, these are exclusive to my Patrons.
If you would like to know more or subscribe, go to https://www.patreon.com/posts/31952948

Fairy Wing Painting Tutorial is Now On Patreon!

That’s right! Now that you’ve watched my first tutorial to learn how to make iridescent fairy wings, you can expand on your crafting skills by adding additional colors to your wings!

If you want to be one of the early viewers of the tutorial, you can watch it on Patreon here: https://www.patreon.com/posts/31204656

It’s exclusive to my Patreon Patrons now until Dec. 1st.

I had planned on releasing this much earlier but life got in the way - as did the threat of evacuation from the nearby Northern CA fires o.O
At least you’ll be ready for the spring festivals and next year’s Halloween season eh? ;P
Have a happy Halloween and Samhain, fairies <3